It will achieve a level of between 0 and 4 depending on how well it faired. Abrasion ResistanceĪn abrasion resistance glove will be placed underneath a moving blade. The back of the gloves will show a gloves resultsīelow we go into more depth about each of the different tests within EN 388. The test will be presented by this table with the rating in column 2 If a glove achieves N/A it means that they haven't been tested.4/5/F is always the best, with 0/A being the worst.Straight cut resistance will achieve a rating of between A and F.Circular cut resistance will achieve a rating of between 0 and 5.Abrasion, tear and puncture resistance will achieve results of between 0 and 4.You can identify an EN 388 rated glove by viewing the below symbol on the back of the gloves in the packaging or in the conformity statement, or you can view the standards table in our copy as seen below. In exceptional cases, a glove will undergo a further test to establish its resistance to impact, but we'll go into that later.ĪN EN 388 rated pair of gloves will be tested to abrasion resistance, tear resistance, puncture resistance and at least one of the cut resistance tests (straight blade or circular blade). The standard was created in 2003, however was recently adjusted in 2016 to include a fifth test. It ranks a gloves performance based off five different tests, giving the gloves a final score that allow the end user to be able to purchase the correct pair of gloves for their chosen risk. Back to Basics: What Is EN 388?ĮN 388 is a certification awarded by a certified body to a pair of work gloves. If you're looking to purchase some EN 388 gloves, or have bought some EN 388 gloves and are unsure of what the standards mean, then this guide will tell you everything you need to know, from the history of the standard to buying your first pair. Laundered using 17MΩ ultra-pure D.Most of the reusable gloves that we sell will be certified to EN 388.Recommended for use in ISO Class 4 (Class 10) cleanroom applications.Recommended for cleaning delicate process in critical environments.Used in Display, Semiconductor, Optical and Lens Manufacturing.Designed for scratch prone sensitive surfaces.Recommended in ISO Class 4 (Class 10) cleanrooms.Durable, soft blade fibre, smooth and non-abrasive wiper.Cleans efficiently with less solvent usage than traditional wipers.Excellent for sensitive and scratch-prone surfaces.Soft to the hand, non-abrasive wiper with sealed edges.Packed in an ISO Class 4 (Class 10) cleanroom.Blade shaped ultrafine fibre cross-section lifts, entraps and removes particulates from critical surfaces.Soft feel, durable, and the ability to wipe surfaces clean without using a wetting agent.8 times the number of filaments and 4 times the surface area of standard Polyester Wipers.Ultrasonically sealed edges minimising fibre and particle generation and providing a smooth non-abrasive edge.70% Polyester / 30% Nylon Microfibre knitted Wiper.The Ultima II® is ultrasonically sealed on all four edges, laundered, processed and packaged to ISO Class 4 (Class 10) environments, with ultra-low levels of particles, ions and extractables makes the Ultima II® consistent with Class 1 – 10 environments. Combined with the ultra-fine, soft fibres protects even the most highly sensitive and critical scratch-prone surfaces. The blade-shaped fibre cross-section gently lifts, encapsulates, and removes particulates even without a wetting agent. The Ultima II® is composed of a Polyester and Nylon knitted Microfiber / Micro-denier fabric, engineered for critical non-abrasive applications in mind. Chemical Protection - Gowns & Coveralls.Waterbased Tacky Mats (REACH) Eco friendly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |